Application of New Modified Poly(ethylene Oxide)-Block-Poly(propylene oxide)-Block-Poly(ethylene oxide) Copolymers as Demulsifier for Petroleum Crude Oil Emulsion

Water soluble nonionic amphiphilic block copolymers based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(propylene glycol) (PPG) were prepared. Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymers, PEG-PPG-PEG, were prepared in the normal condition. The chemical composition and molecular weights of the prepared copolymers were determined from ¹H NMR and GPC techniques. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 318 K and 333 K. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 100% based on demulsifier chemical compositions and concentrations.     

The Surface and Thermodynamic Properties of Ethoxylated Sodium Monoalkyl Sulfosuccinate Surfactants

A series of ethoxylated sodium monooctyl sulfosuccinates [E(n)SMOSS] and ethoxylated sodium monolauryl sulfosuccinates [E(n)SMLSS] have different units of ethylene oxide (n = 9, 14, 23) were synthesized. The surface and thermodynamic properties of these surfactants have been compared with sodium dioctyl sulfosuccinate surfactant (SDOSS) as a commonly used surfactant. The surface tension measurements at 25, 35, 45, and 55°C were used to determine of the critical micelle concentration (CMC) and surface active properties of these surfactants. The effect of the ethylene oxide (EO) unit and the alkyl chain length on the surface properties for the prepared surfactants was studied. The results show that the ethoxylated sodium monoalkyl sulfosuccinates generally have lower values of CMC than that of sodium dioctyl sulfosuccinate. The values of surface active parameters indicate that the ethoxylated sodium monooctyl sulfosuccinates and ethoxylated sodium monolauryl sulfosuccinates surfactants have adsorption properties better than the sodium dioctyl sulfosuccinate surfactant as a resulted presence of ethylene oxide in molecules of the prepared surfactants. The thermodynamic parameters show that the (EO) unites in the chemical structure of ethoxylated sodium monoalkyl sulfosuccinate surfactants improve their micellization and adsorption properties.     

Polarization of Fluorescence of Asphaltene Containing Systems

Formation of supermolecular structures in petroleum disperse systems is determined by interactions of asphaltenes. Petroleum systems are lyophilic oleocolloids with low polar dispersive media which is in dynamic balance with elements of disperse structure. Supermolecular scale of organization is most important for determining the macroscopic parameters. Levshin-Perrin equation for depolarization of fluorescence was modified for polydispersed systems. Interfacial tension coefficient of model asphaltene solution was calculated in a case of Volmer's function. For technogenic mixtures the temperature dependences of the sizes near the point of phase transition are presented. Enthalpy of asphaltene association per one molecule was calculated. Polarization degree together with macroscopic parameters correlates with appearance of asphaltene dispersed phase in system.     

准经典轨线方法对Ca+CD3Ⅰ→CaⅠ+CD3同位素效应的动力学研究

在扩展Lond-Eyring-Polanyi-Sato(LEPS)势能面上,采用准经典轨线方法对反应Ca+CD3I→CaI+CD3进行了动力学计算,并讨论了该反应的同位素效应.在同位素效应作用下,产物CaI的振动态分布向低振动态转移,反应体系的散射截面在低碰撞能和高碰撞能处有较小的变化.同时,受到反应物的质量因子变化的影响,产物转动取向值减少,产物转动取向增强.仅有产物的角分布受同位素效应的影响不明显.     

ZrO2修饰Cu催化剂还原以及反应过程中表面组成的变化

通过热分解法制备Cu模型催化剂,然后经浸渍制备ZrO₂/Cu催化剂,采用SEM、XPS考察了催化剂表面形态和组成,并采用in-situ Raman考察了催化剂在还原和吸附CO和水的过程中随时间的变化。结果表明,还原前Cu催化剂表面主要存在CuO物种,而在ZrO₂/Cu表面,除了CuO物种,还存在着大量的表面羟基物种。ZrO₂/Cu相对Cu更加容易还原为Cu⁰,同时,ZrO₂在催化剂表面聚集形成絮状态,而Cu催化剂还原后主要形成Cu₂O物种。Cu催化剂表面吸附CO后,除了形成Cu-CO外,Cu₂O物种均会迅速消失形成CO₂。Cu催化剂对水的作用比较弱,但是ZrO₂/Cu催化剂和水作用较强,并且通过Cu-OH中间物形成Cu₂O物种。     

碳酸钾催化的铁基氧载体煤催化化学链燃烧

研究了K₂CO₃催化剂及惰性担体对铁基氧载体煤化学链燃烧的影响.实验结果表明,K₂CO₃的添加可明显促进铁基氧载体与煤之间的反应速率,其原因可归结为从氧载体上迁移到煤颗粒上的K₂CO₃对煤-CO₂气化步骤的催化作用(该步骤为整个还原过程的速率控制步骤);由于K₂CO₃本身的促熔效果及加入K₂CO₃后导致的剧烈氧化还原反应,可以发现,K₂CO₃会增大铁基氧载体的烧结;不同惰性担体对铁基氧载体与煤的反应性影响不大,这是由于惰性担体对还原速控步没有影响;K₂CO₃在多循环化学链燃烧过程中依然可以保持一定的催化活性,另外由于催化剂的流失与失活,使得氧载体的反应活性有所下降.     

铜基载氧体与可燃固体废弃物化学链燃烧特性研究

采用机械混合法制备了铜基载氧体,利用两段式管式炉反应平台和磁悬浮热重分析仪分别研究了铜基载氧体与石墨、可燃固体废弃物典型组分及可燃固体废弃物热解气模型物CH₄的化学链燃烧特性。结果表明,机械混合法制备的Cu80Si950载氧体强度高,具有良好的转化率和循环稳定性,是实现可燃固体废弃物化学链燃烧的一种比较理想的载氧体。利用扫描电镜(SEM)、X射线衍射仪(XRD)和颗粒强度测定仪对各个反应阶段载氧体进行分析。结果表明,Cu80Si950载氧体参与反应后表面结构发生巨大改变,机械强度骤降。多次循环之后载氧体结构趋于规则均匀化,形成类似球棒形状的大孔隙率结构,强度保持不变,使得载氧体在长时间使用过程中反应性能得以维持。     

两相流中煤粉的燃烧机理及动力学特征

利用微型流化床动力学分析仪研究了两相流条件下无烟煤粉的燃烧反应机理和动力学特征,并与热重法所得结果进行比较分析。结果表明,当温度大于850℃时,煤粉燃烧机理发生了变化,燃烧气态产物的生成比例也随之改变;当气速大于0.10 m/s时,气体扩散限制基本被消除,煤粉燃烧反应速率主要受界面化学反应控制;煤粉燃烧反应速率随着氧气分压的增大呈幂函数形式增长,且氧气分压对煤粉静置燃烧的影响更加显著。煤氧两相流燃烧的表观活化能与静置燃烧相比降低了49 kJ/mol,相同温度条件下两相流燃烧的界面化学反应阻力也明显小于热重法测试结果。     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

含环氧基团的聚合物微球固载2,2,6,6-四甲基哌啶氮氧自由基催化剂的制备及其催化分子氧氧化苯甲醇

以甲基丙烯酸缩水甘油酯(GMA)为单体, 以乙二醇二甲基丙烯酸酯(EGDMA)为交联剂, 采用悬浮聚合法制得交联聚甲基丙烯酸缩水甘油酯(CPGMA)微球, 然后以4-羟基-2,2,6,6-四甲基哌啶氮氧自由基(4-OH-TEMPO)为试剂, 使CPGMA微球表面的环氧基团发生开环反应, 从而制得了TEMPO固载化微球TEMPO/CPGMA, 考察了制备条件对固载化反应的影响, 并采用多种方法对微球TEMPO/CPGMA进行了表征. 将微球TEMPO/CPGMA与CuCl组成共催化体系, 用于分子氧氧化苯甲醇, 考察了反应条件对催化体系性能的影响. 结果表明, 以含环氧基团的聚合物微球CPGMA为载体, 通过开环反应, 可成功地实现TEMPO的固载化, 开环反应属S_N2亲核取代反应, 适宜采用溶剂N,N''-二甲基甲酰胺和反应温度85℃. 非均相催化剂TEMPO/CPGMA与助催化剂CuCl构成共催化体系, 在室温、常压O₂条件下可高效地将苯甲醇氧化为苯甲醛, 产物选择性和产率分别为100%和90%. 主催化剂TEMPO与助催化剂CuCl适宜的摩尔比为1:1.2; 主催化剂适宜用量为0.90 g. 此外, TEMPO/CPGMA固体催化剂具有良好的循环使用性能.